User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
19
Manage APs 4.4
This page displays some basic information operations about APs connected to the router. If you
want to perform further configurations concerning connected APs, please refer to
AP Mnagement.
To access the configuration page, choose System Status, and click the AP icon. The AP Management
window appears. See the following figure:
Parameter description
Parameter
Description
AP Model
It specifies the model of the corresponding AP.
Remark
It specifies the remark name that you leave for the corresponding AP.
SSID
It specifies the WiFi SSID of the corresponding AP, including 2.4G and 5G WiFi.
You can change the remark for the AP by clicking
Online Devices
It specifies the number of online devices of each wireless network.
IP/MAC Address
It specifies the IP address and MAC address of the corresponding AP.
Operation
By clicking button, you are directed to the web UI of the AP.
Direct to AP
Management
By clicking this button, you are directly navigate to the configuration page Basic Setting of
the
AP Management