User Guide

Table Of Contents
21
Parameter
Description
Connection Type
It specifies in which way the router is connected to the internet.
The router supports PPPoE, Static IP, and Dynamic IP. Refer to the table
Choose
your connection type for details.
The router supports PPPoE Russia, PPTP/PPTP Russia, and L2TP/L2TP Russia as well.
These three connection types are only applicable to Russia and its vicinity.
PPPoE Username
These two parameters are required only when your internet connection type is
PPPoE.
- You can find them on the receipt provided by your ISP when you subscribed
broadband service.
- If you cannot find them, consult your ISP.
PPPoE Password
Server Name
(Optional) Enter these two parameters provided by your ISP. If not, leave them
blank.
Service Name
IP Address
These parameters are required only when your internet connection type is Static IP.
The Secondary DNS parameter is optional.
- You can find them on the receipt provided by your ISP when you subscribed
broadband service.
- If you cannot find them, consult your ISP.
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Status
It indicates the connection status of the corresponding WAN port.
- Authenticated Successfully/Connected: The corresponding WAN port has been
connected properly, and obtained an IP address.
- Connecting…: The router is connecting to the internet or server.
- Disconnected: The port is disconnected, or fails to connect to the internet or
server. Please check if the physical connections are proper, or the parameters you
entered are correct.