User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
24
Set up to access the internet 5.3
This section describes how to set up to access the internet using different connection types.
Choose the proper connection type according to your actual environment. Use the table below to
help you select your internet connection type if you are uncertain about how to select one.
Choose your connection type:
Connection Type
Parameters available
PPPoE
Your ISP provided you the PPPoE username and password.
Dynamic IP
Your ISP automatically assigns you a dynamic IP address.
Static IP
Your ISP provided you IP address, subnet mask, default gateway, DNS and so on.
5.3.1 Set up to internet access with PPPoE
The following takes WAN1 for example.
Step 1 Choose Internet Settings, the configuration page appears.
Step 2 Select PPPoE from the drop-down list menu of Connection Type.
Step 3 Enter the PPPoE Username and PPPoE Password provided by your ISP.
Step 4 Click Save at the bottom of the page to apply your settings.
---- End