User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
27
5.3.3 Set up to internet access with static IP
Step 1 Click Internet Settings, the configuration page appears.
Step 2 Select Static IP from the drop-down list menu of Connection Type.
Step 3 Enter the IP Address, Subnet Mask, Default Gateway and Primary/Secondary DNS
parameters provided by your ISP. Configurations on the following figure are only used for
examples.
Step 4 Click Save at the bottom of the page to apply your settings.
---- End
Wait for the router to complete rebooting. The router connects to the internet successfully when
the Status shows Connected. You can enjoy internet now.