User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
29
Parameter description
Parameter
Description
Enable WiFi Network
Used to enable/disable the wireless network of the router.
Unify 2.4&5 GHz SSID
Whether to unify SSIDs for 2.4 GHz and 5 GHz wireless networks.
SSID
Wireless network name of the corresponding WiFi network.
WiFi Password
Password used for wireless internet connection. You are recommended to use the
combination of digits, letters and special characters for higher security.
Selecting No Password indicates that wireless clients can connect to the wireless
network without a password. Select this option only when necessary since it leads to
weak network security.
Hide SSID
With this function enabled, nearby wireless clients cannot detect the SSID, and you
need to manually enter the SSID on the wireless client to access the wireless
network. Disable indicates that nearby wireless clients can detect the SSID. By
default, this function is disabled.
Max. Clients
Maximum number of wireless clients that can be connected to the wireless network
with the SSID at the same time. After the value is reached, this wireless network
denies new connection requests. Clients connected to all the enabled wireless
networks (including guest networks) of the router cannot exceed 128 on 2.4 GHz and
5 GHz bands respectively. If you enable multiple SSIDs, plan your maximum number
of clients to each SSID first.