User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
31
MAC filters 6.3
6.3.1
Overview
This module allows you to configure MAC address-based wireless access control rules. To enter the
configuration page, choose Wireless > MAC Filters. By default, this function is disabled.
To enable this function, set the MAC Filters to , and click Save at the bottom of the page. The
following configuration area appears:
Parameter description
Parameter
Description
MAC Address
Filter
SSID
It lists all the main wireless networks that the router supports.
If you unify the SSIDs for 2.4 GHz and 5 GHz bands, the corresponding
wireless network only displays one SSID here.
MAC Address
Filter
It specifies the modes you can perform on the corresponding wireless
network. There are three modes for selection:
- Disable: This function is disabled, and all wireless clients can connect to