User Guide

36
Parameter
Description
duration. This prevents some slow clients from occupying excessive airtime
resources, so as to improve the overall AP efficiency and effectively ensure AP
connections for a larger number of clients and greater throughputs.
APSD
It specifies whether to enable the Automatic Power Save Delivery (APSD) mode.
APSD is a WMM power saving protocol created by Wi-Fi Alliance. Enabling APSD
helps reduce power consumption. By default, this mode is disabled.
Client Timeout Interval
It specifies the maximum period before a WiFi client is disconnected from the router
if the client exchanges no data with the router. When data is exchanged within the
period, countdown stops.
Short GI
Short guard interval for preventing data block interference.
Propagation delays may occur on the receiver side due to factors such as multipath
wireless signal transmission. If a data block is transmitted at an overly high speed, it
may interfere with the previous data block. The short GI helps prevent such
interference. Enabling the short GI can yield a 10% improvement in wireless data
throughput.
Mandatory Rate
It specifies the basic rate sets that wireless clients must meet to connect to the
router. Wireless clients are denied by the router if they fail to match the basic rate
sets ticked here.
You are recommended to keep the default settings. If you need to modify them,
please do under professional guidance.
Optional Rate
It specifies that any connected wireless clients that support the data rate options
ticked here may communicate with the router using that rate.
You are recommended to keep the default settings. If you need to modify them,
please do under professional guidance.