User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
38
Parameter description
Parameter
Description
Guest
Network
Enable Guest
Network
Used to enable or disable this function.
Unify 2.4&5 GHz
SSID
Used to unify SSIDs for 2.4 GHz and 5 GHz guest wireless networks.
Isolate Client
With this function enabled, clients connected to the guest network cannot
communicate with each other, leading to higher wireless network security.
SSID
Wireless network name of the guest network.
To differentiate the main network and the guest network, you are
recommended to set the SSIDs differently.
WiFi Password
Password used for wireless internet connection. You are recommended to
use the combination of digits, letters and special characters for higher
security.
No Password
Wireless clients can connect to the wireless guest network without a
password. Select this option only when necessary since it leads to weak
network security.
Guest
Network IP
Address
IP Address
It specifies the IP address (default: 192.168.168.1) of the guest network.
The router assigns 192.168.168.X to wireless clients connected to it.
You are recommended to keep the default settings.
Subnet Mask
Subnet mask of the guest network.