User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
42
Configure address reservation manually 7.2
To reserve static IP addresses for hosts disconnected to the router, you can add the rule manually.
If the network segment of LAN IP of the router is modified in LAN settings, the IP address of the
manually-reserved host will not change synchronously, but the rule remains effective.
Before you start
Obtain the IP addresses and MAC addresses of hosts you are going to add.
Configuration Procedure
Step 1 Choose Address Reservation, and move to the Manual Address Reservation configuration
area. See the following figure.
Step 2 Click +Add. The Add configuration window appears.
Step 3 Enter the IP Address and MAC Address, which is 192.168.0.182 and 00:23:24:E8:14:6B in
this example.
Step 4 (Optional) Add a brief description in the Remark filed, which is Test in this example.
For convenient management later, you are recommended to enter a brief description to distinguish
different hosts.
Step 5 Click Save.
---- End