User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
51
Parameter description
Parameter
Description
IP Group
Create or select the IP group to which the rule applies. To create an IP Group, choose Filter
Management > IP Group/Time Group.
Time Group
Create or select the time group to which the rule applies. To create a time Group, choose
Filter Management > IP Group/Time Group.
Concurrent
Sessions
Maximum number of sessions of each device. Recommended value: 300.
Control Mode
This device supports the following two control modes:
- Shared: All clients in the controlled IP groups share the upload/download rate you
configured here. In this mode, bandwidth allocated to each client may vary.
- Dedicated: Each client in the controlled IP groups exclusively enjoys the
upload/download rate you configured here. In this mode, bandwidth allocated to each
client is identical.
Upload Rate
Maximum upload rate a controlled client can reach.
Download Rate
Maximum download rate a controlled client can reach.
Step 6 Click Save.
---- End
Added successfully. See the following figure:
Click to modify the rule.
Click to delete the rule.
Click to delete multiple selected rules.
Click to select all rules.
Toggle the button to enable/disable the rule.