User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
56
Enable Captive Portal, the configuration page is shown as below.
Parameter description
Parameter
Description
Captive Portal
It specifies whether or not to enable the captive portal function of the router.
Authentication Type
It specifies the type of the captive portal.
- Local User Authentication: It allows a user to access the internet with a username
and password on the authentication web page. The username and password should
be added on Authentication > User Management page.
- One-key authentication: It allows a user to access the internet by clicking Connect
when receiving an authentication web page.