User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
61
9.2.3 Configure authentication with local user authentication
Configuration description
Step
Task
Description
1
Configure basic settings.
Set authentication type, valid duration, and choose networks to be
applied, as well as the required authentication page.
2
Configure authentication
page settings.
Configure the authentication page received by users.
Configuration procedure
Step 1 Configure basic settings.
1. Choose Authentication > Captive Portal, and enable this function.
2. Set Authentication Type to Local User Authentication..
3. Set Valid Duration to No Limit.
4. Click Choose, and choose the network(s) to be applied, and click Save.
The selected wireless network(s) cannot be encrypted. Otherwise the user cannot access the
authentication page.
If the WiFi network name you selected is modified, it will be automatically deselected here. To make
the WiFi network effective, you have to re-select the WiFi network with the new SSID here manually.
Step 2 Configure authentication page settings.
1. Set required parameters for the authentication page by following the on-screen
instructions. Configurations on the following figure are only used for examples.