User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
63
9.2.4 Configure email authentication
Configuration description
Step
Task
Description
1
Configure basic settings
Set authentication type and valid duration, choose networks to be
applied, and set the maximum number of people sharing the same
authentication mode.
2
Configure email server
settings
Configure the Email used to send authentication code, including Email
Address, Email Password, SMTP Server, SMTP Server Port and Account
for Test.
3
Configure authentication
page settings
Configure the authentication page received by users.
Configuration procedure
Step 1 Configure basic settings
1. Choose Authentication > Captive Portal, and enable this function.
2. Select Email Authentication from the Authentication Type drop-down list menu.
3. Set Valid Duration.
4. Click Choose, choose the network(s) to be applied, and click Save.
The selected wireless network(s) cannot be encrypted. Otherwise the user cannot access the
authentication page.
If the WiFi network name you selected is modified, it will be automatically deselected here. To make
the WiFi network effective, you have to re-select the WiFi network with the new SSID here manually.
5. Set a number for People Shared with.
Step 2 Configure email server settings.