User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
65
9.2.5 Configure one-key authentication
Configuration description
Step
Task
Description
1
Configure basic settings.
Set authentication type, valid duration, and choose networks to be
applied.
2
Configure authentication
page settings
Configure the page received by users.
Configuration procedure
Step 1 Configure basic settings.
1. Choose Authentication > Captive Portal, and enable this function.
2. Select One-key authentication from the Authentication Type drop-down list menu.
3. Set Valid Duration.
4. Click Choose, choose the network(s) to be applied, and click Save.
The selected wireless network(s) cannot be encrypted. Otherwise the user cannot access the
authentication page.
If the WiFi network name you selected is modified, it will be automatically deselected here. To make the
WiFi network effective, you have to re-select the WiFi network with the new SSID here manually.
Step 2 Configure authentication page settings.
1. Set required parameters for the authentication page by following the on-screen
instructions. Configurations on the following figure are only used for examples.