User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
71
9.3.2 Example of configuring local user authentication
Networking requirement
An enterprise wants to establish a network and regulate the use of the network with the router. The
requirements include:
- Local user authentication with user name and password is required for employees who
want to access the internet through the LAN port of the router or the wireless network
Tenda_W20E.
- No upload or download rate limit is specified for employees.
- Employees are directed to
www.tenda.com.cn after being authenticated.
- The network administrator is free from authentication when accessing the internet.
The requirement can be met with SMS authentication.
Assume that:
- The MAC address of the network administrator’s computer is 44:37:E6:12:34:56.
Configuration procedure
Step 1 Configure local user authentication.
1. Choose Authentication > Captive Portal.
2. Enable Captive Portal.
3. Select Local User Authentication in the Authentication Type drop-down list.
4. Select Valid Duration, such as 8 hours.
5. Select Choose.
6. Choose the networks that the local user authentication is applied to, amd click Save