User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
80
Parameter description
Parameter
Description
Host Type
It allows you to set a device without authentication based on host name, IP address or MAC
address.
Host Name
When the Host Type is set as Host Name, input the host name of the authentication-free
device.
To get the host name of the device, navigate to System Status > Online Devices.
Once the host name is modified, the authentication-free rule will be disabled. To make such a
rule effective, manually edit the Host Name here simultaneously.
IP Address
When Host Type is set as IP Address, input the IP address of the authentication-free device.
MAC Address
When Host Type is set as MAC Address, input the MAC address of the authentication-free
device.
Remark
(Optional) It specifies a brief description of an authentication-free host.
Step 3 Click Save.
---- End
The User Management page appears, showing the added hosts. See the following figure: