User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
82
Parameter description
Parameter
Description
User Name
User Name specifies a user name for captive portal. Password specifies a password
for captive portal. If captive portal is enabled, a user must be authenticated with a
correct user name and password before accessing the internet.
Password
Remark
(Optional). It specifies the description of a user account.
Valid Duration
It specifies the validity of a user account.
Valid Time: Specify the validity time by hours.
Valid Date: Specify the date before the account expires.
People Shared with
It specifies the number of users that the account is allowed for being authenticated.
Concurrent Sessions
It specifies the maximum number of connections that can be set up on each computer
covered by the corresponding rule.
Upload Rate
It specifies the device’s maximum upload/download rate covered by the
corresponding rule.
1 Mbps=128 KB/s
Download Rate
Step 4 Click Save.
---- End
The User Management page appears, showing the added user accounts. See the following figure.
Client Status includes:
- Offline: The account is not in use.
- Online: The account is in use.