Datasheet

W300D Wireless-N ADSL2+ Router
PBC：
Sel
ect the PBC or press the WPS button on
the front panel of the device for one second
(Press the button for one second and WPS
indicator will be blinking for 2 minutes, which
means the WPS is enabled. During the
blinking time, you can enable another device
to implement the WPS/PBC negotiation
between them. At present, the WPS only
supports up to 32 clients access. Two
minutes later, the WPS indicator will be off. If
more clients are added, repeat the above
steps).
PIN：
If this option is enabled, you need to enter a
wireless client’s PIN code in the field and
keep the same code in the client.
WPS Summary：
Show Wi-Fi current protection state,
authentication mode, encryption method,
etc.
Note：
Press the WPS/Reset button for 1
second on the front panel to run PBC.
Press for 7 seconds, the device’s setting
will restore to default setting. The
access client has to support WPS
function when you implement WPS
settings.
45