Datasheet

W300D Wireless-N ADSL2+ Router
from the drop-down menu. Here, d
efault
value is (1-2-5.5-11Mbps…).
Beacon Interval：
The frequency interval of the beacon, which
is a packet broadcast by a router to
synchronize a wireless network. The default
value is 100 ms. It is recommended not to
modify the default value.
Fragment Threshold：
The fragmentation threshold defines the
maximum transmission packet size in bytes.
The packet will be fragmented if the arrival is
bigger than the threshold setting. The default
size is 2346 bytes.
RTS Threshold：
RTS stands for “Request to Send”. This
parameter controls what size data packet the
frequency protocol issues to RTS packet. If
the device works in SoHo, do not modify the
default value.
TX Power：
Set the wireless output power level. The
default value is 100.
WMM Capable：
To enhance wireless multimedia transfer
performance (0n-line video and voice). If you
are not clear about this, enable it.
APSD Capable：
It is used for auto power-saved service. The
default is disabled.
49