Datasheet

W300D Wireless-N ADSL2+ Router
Access Poli
cy:
Select one number from the drop-down
menu.
Enable:
Check to enable the access policy.
Clear the Policy:
Click “Clear” button to clear all settings for
the policy.
Filter Mode:
Click one radio button to enable or disable to
access the Internet.
Policy Name:
Enter a name for the access policy selected.
IP Start/End:
Enter the starting/ending IP address.
Port No.:
Enter the port range based over the protocol
for access policy.
Protocol:
Select one protocol (TCP/UDP/Both) from the
drop-down menu.
Times: Select the time range of client filter.
Days: Select the day(s) to run the access policy.
For example:
If you set the IP address 192.168.0.10 not to
access the Internet at 8:00-18:00 each day,
please configure it as the following page:
68