Product specifications

ADSL2/2+ Router
upgrades the network to ADSL2+ one day. Plus, there is almost no
difference in the prices between an ADSL2+ modem and an
ADSL2 modem.
8. Q: What is VPI/VCI?
A: VPI is short for Virtual Path Identifier and VCI is short for Virtual
Channel Identifier. Both are used by DSLAM to identify an ATM
terminal (ADSL connection). Different ISP may use different
VPI/VCI values. Consult your ISP if you are not clear.
9. Q: What parameters do I need from my ISP for the ADSL Internet
connection?
A: You will need the following info: connection protocol, user name,
password, VPI/VCI values and encapsulation type.
10. Q: How do I reset my device?
A: 1). Power up the device
2). Keep pressing the Reset button located on the device fro over
8 seconds and then release it. The device shall restart
automatically and settings are successfully restored to factory
defaults.
11. Q: How do I obtain a correct DNS server address?
A: 1）. Contact your ISP for the DNS server address.
2). Go to Status on web utility to view and note down the DNS
server address when device is successfully connected to Internet.
12. Q: What factors may adversely affect wireless signal?
Maximum wireless signal rate is derived from IEEE Standard 802.11g
and 802.11n specifications. Actual data throughput will vary due to
factors below:
1. Network conditions such as volume of network traffic lower actual
data throughput.
2. Environmental factors such as building materials and construction
- 104 -