Manual

Thank you for purchasing Tenergy 1-4S LiPo/Li-ion/LiFePO4 charger!
Please read the manual carefully before using this charger.
Features:
1. Automatic constant current, constant voltage charging.
2. Automatically terminate charging process when input voltage is lower than 10V or higher than
16V.
3. Reverse polarity and short circuit protection.
4. Over-charge and over-current protection.
5. Applicable for Li-ion, Li-Po and LiFeO4 battery pack.
Specifications:
Applicable battery types: LiPo, Li-ion and LiFeO4 battery
Battery count: 1-4cells
Input: DC 10-16V, 1.5A
Charging current: 1A
Dimension: 88x57.3 x 16.8 mm
Weight: approx. 100g
Operating Instructions:
1. Connect the DC power or AC adapter (15V, 1.5A) to the charger. The power LED will be on.
2. Select the type of battery you want to charge.
3. Connect battery pack to charger, make sure the polarity is connected in the right way, then
charging will start automatically.
4. Charging LED should be Red during charging.
When the charging LED turns Green, the battery pack is fully charged and balanced.

Summary of content (2 pages)