Battery Charger For Tenergy Li-ion RCR123A 650mAh Rechargeable Batteries
• Charger designed and certified to work with Tenergy 3.7V 650mAh RCR123A rechargeable batteries for Arlo Wire-free Security Cameras (VMC3030). • Worldwide voltage for 100-240V AC input. • Four independent channels for individual battery charging and detection. • Constant current and constant voltage charging mode. • Battery reverse polarity protection automatically terminates charging.
• Input: 12V • Output: 4.2V 1000mA 400mA x 4 • Applicable battery type: Tenergy 3.7V 650mAh rechargeable Li-ion battery Tenergy 3.7V 650mAh RCR123A Rechargeable Li-ion battery • Single cell battery - Item No. 30281 • Blister card - Item No.
WARNING • The charger is designed for and compatible only with Tenergy 3.7V 650mAh Li-ion RCR123A rechargeable batteries. • DO NOT CHARGE ANY TYPES OF NON-RECHARGEABLE LITHIUM CR123A/CR123 BATTERIES, OR ANY OTHER TYPES OF NON-RECHARGEABLE BATTERIES. CHARGING NON-RECHARGEABLE BATTERIES WILL CAUSE FIRE OR EXPLOSIONS. • DO NOT charge batteries with any other types of chemistry.
Designed and Distributed by Tenergy Corporation Fremont, CA 94539, USA Tel: (510) 687-0388, Fax: (510) 687-0328 www.Tenergy.