3640E Operator Manual

OPERATION
3640E 330569 (01--00)
14
POWER KILL SWITCH (OPTION)
The Power Kill Switch immediately stops all power
to the machine.
Stop machine power: Press the Power Kill
Switch.
Restart machine power: Release the Power Kill
Switch by turning it to the right. Turn the key
counter--clockwise, then turn the key fully
clockwise and release it to the on position.
CIRCUIT BREAKERS
Circuit breakers are resetable electrical circuit
protection devices designed to stop the flow of
current in the event of a circuit overload. Once a
circuit breaker is tripped, reset it manually by
pressing the reset button after the breaker has
cooled down.
If the overload that caused the circuit breaker to
trip is still present, the circuit breaker will continue
to stop current flow until the problem is corrected.
The circuit breakers are located on the instrument
panel.
The chart below shows the circuit breakers and
the electrical components they protect.
Circuit
Breaker
Rating Circuits Protected
CB1 15 A Filter shaker motor
Side brush motor(s)
CB2 50 A Main motor, standard,
CB2 40 A Main motor, (EE)
Home
Find...
Go To..