3640E Operator Manual

OPERATION
3640E 330569 (01--00)
20
SWEEPING CARPET
1. If necessary, remove the floor sweeping
brush and install the carpet sweeping brush.
NOTE: DO NOT attempt to sweep carpet with a
floor sweeping brush. Damage to the carpet could
result.
2. Clean the rear wheels and front casters with
a damp cloth before sweeping carpet.
3. Install the carpet sweeping pin into the main
brush lever to control carpet brush down
pressure. Do not attempt to sweep carpet
without first installing the brush down
pressure pin.
4. Ensure the battery bags are in place. Do not
remove battery bags from machine.
NOTE: The battery bags are designed to prevent
an accidental overflow of battery acid from
damaging the carpet.
5. If desired, move the side brush lever to the
right, out of the raised position, then then
forward to the desired brush down pressure
setting.
NOTE: Sweeping carpet with the side brush(es)
is optional.
6. Move the main brush lever to the left, out of
the raised position, then forward to the
desired carpet brush down pressure setting.
7. Squeeze the clutch handle to begin
sweeping.
8. Sweep as needed.
Home
Find...
Go To..