3640E Operator Manual

MAINTENANCE
3640E 330569 (01--00)
42
ROTATING THE MAIN BRUSH
1. Turn the machine power off and move the
directional lever into the PARK position.
FOR SAFETY: Before leaving or
servicing machine, stop on level
surface, turn off machine, and remove
key.
2. Turn the main brush pin 1/4 turn
counter--clockwise and remove.
3. Remove the debris hopper.
4. Pull the main brush out of the machine
through the hopper opening.
5. Remove the brush hub from the main brush
and install it into the other end.
6. Install the main brush into the machine.
7. Insert the main brush pin through the hole in
the frame and into the main brush hub. Turn
the main brush pin 1/4 turn clockwise.
8. Replace the hopper.
Home
Find...
Go To..