3640E Operator Manual

MAINTENANCE
3640E 330569 (2--01)
46
PUSHING AND TRANSPORTING THE
MACHINE
PUSHING THE MACHINE
If the machine becomes disabled, it can be easily
pushed in neutral if necessary.
TRANSPORTING THE MACHINE
1. Position the front of the machine at the
loading edge of the truck or trailer .
FOR SAFETY: Use truck or trailer that
will support the weight of the machine.
NOTE: Empty the hopper before transporting the
machine.
2. If the loading surface is not horizontal or is
higher than 380 mm (15 in) from the ground,
use a winch to load machine.
If the loading surface is horizontal AND is
380 mm (15 in) or less from the ground, the
machine may be pushed onto the truck or
trailer.
3. To winch the machine onto the truck or
trailer, remove the hopper and place a strap
through the front frame of the machine.
Make sure the machine is in neutral and is
centered.
FOR SAFETY: When loading machine
onto truck or trailer, use winch. Do not
push the machine onto the truck or
trailer unless the loading surface is
horizontal AND is 380 mm (15 in) or less
from the ground.
4. Position the machine onto the truck or trailer
as far as possible. If the machine starts to
veer off the centerline of the truck or trailer ,
stop and center the machine.
Home
Find...
Go To..