Operator Manual

OPERATION
3640 330580 (2--06)
16
CIRCUIT BREAKER
The circuit breaker is a resetable electrical circuit
protection device designed to stop the flow of
current in the event of a circuit overload. If the
circuit breaker is tripped, reset it manually by
pressing the reset button after the breaker has
cooled down.
If the overload that caused the circuit breaker to
trip is still present, the circuit breaker will continue
to stop current flow until the problem is corrected.
The circuit breaker Is located on the instrument
panel.
The chart below shows the circuit breaker and the
electrical components it protects.
Circuit
Breaker
Rating Circuits Protected
CB1 15 A Ignition
Side brush(es)
Shaker motor
THERMO SENTRYt
The Thermo Sentryt will automatically turn the
machine’s engine off in case of a fire in the
hopper. If the Thermo Sentryt is tripped, it will
automatically reset itself after cooling down.
FILTER SHAKER SWITCH
The filter shaker switch activates the filter shaker
motor. The shaker motor shakes debris from the
panel filter . Machines with a bag filter do not have
a filter shaker motor or switch.
Make sure the filter compartment door is closed
properly, then press the switch. The filter shaker
motor will shake the filter for 15 seconds, then
stop automatically. Remove loose debris from the
panel filter compartment door when the shaker
motor stops.
NOTE: The filter shaker will operate while the
engine is running. Be sure to turn the engine off
before shaking the filter.