Operator Manual

OPERATION
19
3640 330580 (01--00)
CHANGING AN LPG T ANK
1. Stop the machine in a designated safe area
with the engine running. Move the directional
lever into the PARK position.
2. Close the service valve on the LPG tank.
3. Allow the engine to run until it stops from
lack of fuel.
FOR SAFETY: When servicing machine,
keep flames and sparks away from fuel
system service area. Keep area well
ventilated.
4. Put on gloves to remove the
quick-disconnect tank coupling.
5. Unlatch the clamp holding the empty tank.
Remove the empty tank from the machine
and store it in a designated safe area.
6. Carefully place a full LPG tank into the tank
holder. Align the full tank so that the tank
centering pin enters the aligning hole in the
tank collar .
NOTE: Make sure the LPG fuel tank matches the
fuel system (vapor tank with vapor system).
7. Latch the security clamp to lock the tank in
position.
350412
350412
350412