Operator Manual

OPERATION
3640 330580 (01--00)
30
POST-O PERATION CHECKLIST
Check this list of items after sweeping and
emptying hopper:
- Check for wire or string tangled in the
bristles of the main brush and side
brush(es). Additional side brush option
shown.
FOR SAFETY: Before leaving or
servicing machine, stop on level
surface, turn off machine, and remove
key.
- Check and, if necessary, wipe the vacuum
inlet plate clean.
- LPG powered machines: Ensure the LPG
tank service valve is closed.
- Check for fuel odor that indicates a fuel leak.
- Check under the machine for fluid leaks
(fuel, oil).
- Check the skirts and seals for damage and
wear.
- Check the bag filter (option) for fullness or
shake the panel filter and clean the filter
compartment.
- Check the service records to determine
routine maintenance requirements.
OPERATION ON INCLINES
When operating the machine on an incline, use
first speed for increased power and control. The
maximum rated climb and descent angle for the
machine is 8_.
NOTE: Tostopthemachineatanytime,
regardless of direction of travel, release the clutch
handle. The machine will immediately slow down,
then stop completely.