Operator Manual

MAINTENANCE
49
3640 330580 (12--00)
STORING MACHINE
When storing the machine for extended periods of
time, the following procedures must be followed:
1. Raise the main and side brush(es).
2. Empty and clean the debris hopper.
3. Drain or disconnect and remove (LPG tank)
fuel system.
4. Close the gasoline valve.
5. Change the engine oil.
6. Remove the spark plug, pour 30 cc (1 oz) of
engine oil into the cylinder. Slowly rotate the
crankshaft to distribute the oil. Replace the
spark plug.
7. Clean the engine cooling fins.
8. Store the machine in a clean dry area.