Operator Manual

MAINTENANCE
104
T17 9020160 (4−2016)
6. Set the brush spring open on the new brush
to make installation easier.
7. Push the new brush under the scrub head,
align the brush drive socket with the brush
drive hub, and lift the brush up onto the brush
drive hub until the brush locks onto the hub.
8. Ensure the brush is securely mounted on the
brush drive hub.
9. Close and secure the squeegee support door
and close the main brush access door.
10.Repeat procedure for the other brushes.
REPLACING DISK SCRUB PADS
1. Remove the pad driver from the machine.
2. Squeeze the spring clip together and remove
the center disk from the pad driver.
3. Remove the scrub pad from the pad driver.
4. Flip or replace the scrub pad. Center the
scrub pad on the pad driver and reinstall the
center disk to secure the pad in place on the
pad driver.
5. Reinstall the pad driver onto the machine.