Operator Manual

MAINTENANCE
107
T17 9020160 (4−2016)
SIDE BRUSH(ES) (OPTION)
Check the side brushes daily for wear or damage.
Remove any tangled string or wire from the side
brushes or side brush drive hubs.
REPLACING THE SCRUBBING SIDE BRUSH
Replace the pads when they no longer clean
effectively. Replace the brushes when they no
longer clean effectively or when the bristles are
worn down to the yellow indicators.
1. Raise the side brush assembly and turn off
the machine.
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, set parking brake, and remove key.
2. Squeeze the spring handles and let the side
brush drop to the floor.
3. Remove the side brush from under the side
brush assembly.
4. Set the brush spring open on the new brush
to make installation easier.
5. Place the new side brush underneath the side
brush assembly and lift the side brush up onto
the side brush hub until the brush locks onto
the hub.