Operator Manual

MAINTENANCE
112
T17 9020160 (5−2014)
SQUEEGEE BLADES
Check the squeegee blades for damage and wear
daily. When the blades become worn, rotate the
blades end−for−end or top−to−bottom to a new
wiping edge. Replace blades when all edges are
worn.
Check the deflection of the squeegee blades daily
or when scrubbing a different type of surface.
Check the leveling of the rear squeegee every 50
hours of operation.
REPLACING (OR ROTATING) THE REAR
SQUEEGEE BLADES
1. If necessary, lower the Rear bumper door /
step.
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, set parking brake, and remove key.
2. Disconnect the vacuum hose from the rear
squeegee assembly.
3. Loosen both squeegee mounting handles.
4. Pull the rear squeegee assembly from the
machine.