Operator Manual

MAINTENANCE
128
T17 9020160 (5−2014)
7. Start the machine.
8. Press and release the ec−H2O module flush
switch to start the flush cycle.
NOTE: The module will automatically shut off
when the flush cycle is complete (approximately 7
minutes). The module must run the full 7−minute
cycle in order to reset the system indicator light
and alarm.
9. Pour 2 gallons (7.6 liters) of cool clean water
into the solution tank.
10. Press and release the flush switch to rinse
any remaining vinegar from the module. After
1−2 minutes, press the flush switch to turn off
the module.
11. Disconnect the drain hose from the ec−H2O
manifold hose.
12. Reconnect the outlet hose to the ec−H2O
manifold hose.
13. Return the drain hose to storage location in
the ec−H2O compartment.
14. Close the right shroud.