Operator Manual

MAINTENANCE
131
T17 9020160 (3−2019)
PREPARING THE MACHINE FOR OPERATION
AFTER STORAGE
All antifreeze must be completely cleaned from
the scrubbing system before the machine can be
used for scrubbing.
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, and set parking brake.
1. Completely drain all antifreeze from the
solution tank.
2. Rinse out the solution tank. Refer to
DRAINING AND CLEANING THE SOLUTION
TANK in the OPERATION section for
instructions how to clean the solution tank.
3. Pour 11.4 L (3 gal) of cool clean water into the
solution tank.
4. Machines equipped with optional detergent
tank only: Pour 1.9 L (1/2 gal) of cool clean
water into the detergent tank.
5. Start the machine.
6. Press the 1−STEP button.
7. Repeatedly press the Solution increase button
(+) until the solution flow is at the highest
setting.
Standard Panel
Pro−Panel
NOTE: The ec−H2O systems on machines
equipped with ec−H2O must be primed before the
machine is ready for operation. See PRIMING
THE ec−H2O SYSTEM for additional instructions.