Operator Manual

MAINTENANCE
133
T17 9020160 (5−2014)
PRIMING THE ec−H2O SYSTEM
Prime the ec−H2O system if the machine has
been stored for a long period with no water in the
solution tank / ec−H2O system.
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, and set parking brake.
1. Fill the solution tank with clean cool water.
See FILLING THE SOLUTION TANK section
of this manual.
2. Open the right shroud to access the ec−H2O
assembly.
3. Press the connector button to disconnect the
outlet hose from the ec−H2O manifold.
NOTE: Look for arrows on the hose near where
the hose is coming from the bottom of the
ec−H2O assembly to determine which hose is the
outlet hose.
4. Remove the drain hose from the ec−H2O
compartment.
5. Connect the drain hose to the ec−H2O outlet
hose.
6. Place the drain hose into a empty container.