Operator Manual

SUPERVISOR CONTROLS
139
T17 9020160 (3−2019)
SUPERVISOR CONTROLS
PRO−PANEL SUPERVISOR CONTROLS
The supervisor controls feature allows a
supervisor to program the machine scrubbing
settings for operator use. The lockout functionality
will prevent the operator from changing or saving
the settings.
The supervisor controls feature will lower machine
variability for consistent, repeatable cleaning
results, machine quality assurance regardless of
user experience, and reduce user training
requirements.
There are two types of user modes that will
interface with the operator home screen:
Operator Mode − Capable of machine operation
with permissions and restrictions controlled by the
supervisor.
Supervisor Mode − Capable of machine
operation with full use of all controls, along with
confi guring permissions and restrictions for the
operator mode.
A new machine from the factory will automatically
start in the supervisor mode with a preassigned
default supervisor profile. The factory−assigned
supervisor login number is “1234”. This login
number is not required until it is enabled. The
default supervisor profi le name and login number
can be changed as described in this section. If the
new assigned supervisor mode login number is
forgotten, please contact Tennant service.
ENTERING THE SUPERVISOR MODE − FIRST
TIME USE ONLY
1. Turn on the machine. The main operating
screen will appear in the display.
2. Press the help button to access the help
screen.
3. Press the logout button.
4. Use the keypad to enter the factory assigned
supervisor login number 1234 into the display
above the keypad. Press the enter button
when finished entering the supervisor login
number.
Press the backspace button if necessary to
delete and reenter a number.
5. The supervisor machine operation screen
should appear in the display. Press the
settings button to access the supervisor
settings screen.
6. Proceed to ADDING / EDITING PROFILES.