Operator Manual

SUPERVISOR CONTROLS
142
T17 9020160 (3−2019)
ADDING / EDITING PROFILES
1. Turn on the machine, log into the supervisor
screen, and press the settings button to
access the supervisor settings screen. See
ENTERING THE SUPERVISOR MODE.
2. Press the Add/Edit Profiles button to access
the Add/Edit Profiles screen.
3. Press the Add Profile button to access the
Add Profile screen.
Press the Add Profile button to access the
screens and menus to add a new profile.
Press the Edit Profile button to edit an
existing profile.
Press the Copy Profile button to copy an
existing profile.
Press the Delete Profile button to delete an
existing profile.
Press the home button to navigate back to
the main operating screen.
Press the back button to navigate back to
the previous screen.
4. Press the Operator button to add a new
operator, or Supervisor button to add a new
supervisor.
NOTE: The default supervisor cannot be deleted
from the profile list.
Press the Operator button to add / edit /
copy / delete an operator profile.
Press the Supervisor button to add / edit /
copy / delete a supervisor profile.
5. Use the keypad to enter the new user /
supervisor name. Press the enter button.