Operator Manual

SUPERVISOR CONTROLS
143
T17 9020160 (3−2019)
6. Use the keypad to assign the new user /
supervisor a login number. The new login
number can be any combination of numbers
ranging from 3 to 8 digits in length. Press the
enter button.
Press the backspace button if necessary to
delete and reenter a number.
7. Select the controls the new user should have
access to use. Green represents unlocked
controls and gray represents locked controls.
Press the flashing save button to save the
new profile.
Press the help button to access the help
screen.
Press the back button to return to the user
access page.
8. The new user profile is now saved to the
operator profile list. Multiple operator and
supervisor user profiles can be added. Press
the back arrow button to return to the
previous screen to add more user profiles or
to enable login.
9. To enable the login number at start up, press
the Enable Login button.
The Enable Login button will change from
Enable Login to Disable Login. See
DISABLING LOGIN for instructions how to
disable login.