Operator Manual

SUPERVISOR CONTROLS
149
T17 9020160 (3−2019)
DISABLING / ENABLING THE
PRE−OPERATION CHECKLIST
Disabling / enabling the Pre−Operation checklist
allows the Pre−Operation checklist to be disabled
if it is not necessary for the operator to complete
the checklist prior to operating the machine and
enabled if it is necessary for the operator to
complete the checklist prior to operating the
machine.
1. Turn on the machine, login to the main
operation screen, and press the setting button
to access the supervisor settings screen. See
ENTERING THE SUPERVISOR MODE.
2. Press the Checklist Setup button to access
the Pre−Operation checklist setup screen.
3. Press the Disable Checklist button / Enable
Checklist button to disable / enable the Pre−
Operation Checklist.
Press the home button to navigate back to
the main operating screen.
Press the back button to navigate back to
the previous screen.