Operator Manual

SUPERVISOR CONTROLS
152
T17 9020160 (3−2019)
7. Press the enter button to set the zone button
settings. The main operating screen returns to
the display with the zone button named. The
brush pressure and solution flow setting also
briefly appear in the display.
SETTING / CHANGING THE DATE AND TIME
Setting / changing the date and time allow the
system date and time to be set / changed.
1. Turn on the machine, login to the main
operation screen, and press the setting button
to access the supervisor settings screen. See
ENTERING THE SUPERVISOR MODE
2. Press the Date/Time Set button to access the
date / time screen.
Press the date button to change the system
date
Press the time button to change the system
time.
Press the toggle button to toggle between
hours, minutes, and AM / PM on the time
screen and the month, day, and year on the
date screen.
Press the increase button advance the time
/ date parameters
Press the decrease button to reverse the
time / date parameters.
Press the home button to navigate back to
the main operating screen.
Press the back button to navigate back to
the previous screen.
3. Press the home button when finished setting /
changing the system date and time to return
to the main operating screen.