Operator Manual
Table Of Contents
OPERATION
24
T17 9020160 (3−2019)
SIDE BRUSH BUTTON (OPTION)
The side brush button controls the sweeping or
scrubbing side brush option.
Turn on the side brush: Press the side brush
button. The indicator light will illuminate.
Turn off the side brush: Press the side brush
button. The indicator light will turn off.
NOTE: The side brushes cannot operate
independently from the main sweep brushes. The
main sweep brushes also come on when the side
brush button is pushed.
VACUUM FANS / SQUEEGEE BUTTON
Lower squeegee and turn vacuum fans on: Press
the Vacuum fans / squeegee button. The indicator
light will illuminate when the squeegee is lowered.
Raise squeegee and turn vacuum fans off: Press
the Vacuum fans / squeegee button. The indicator
light will go out when the squeegee is raised.
NOTE: The 1−STEP button does not need to be
activated to operate the vacuum fans / squeegee
system. The vacuum fans / squeegee button can
be turned on or turned off with the 1−STEP button
either on or off.
SCRUBBING MAIN BRUSH BUTTON
Turn on the scrubbing main brush: Press the
scrubbing main brush button. The indicator light
will illuminate.
Turn off the scrubbing main brush: Press the
scrubbing main brush button. The indicator light
will turn off.
NOTE: The scrubbing main brush will turn on for
machines not equipped with the scrubbing main
brush button when the 1−STEP button is pressed.
SOLUTION ON / OFF BUTTON
The solution flow is designed to stay on whenever
the scrub brushes are on. It can be turned off for
ten seconds with the solution on / off button to go
around corners, etc. See also SETTING THE
SOLUTION FLOW section.
Shut off the solution flow (for 10 seconds): Press
the solution on / off button. All the solution fl ow
indicators will turn off. (The solution fl ow will
automatically restart at the end of the 10 second
delay).
Turn on the solution flow: Press the Solution on /
off button to turn on the solution flow. The solution
indicator lights will turn back on and the solution
flow will default to the last setting used.