Operator Manual

OPERATION
27
T17 9020160 (3−2019)
OPERATION OF CONTROLS − PRO−PANEL
PRO−ID LOGIN SCREEN
NOTE: The Pro−ID login screen only applies if the
machine was set up with it. Predefined user
accounts must be created within the Supervisor
Mode.
Use the Pro−ID login screen to log into the\
machine.
Use the keypad to enter the user login number
into the display above the keypad.
Press the Enter button to log into the
machine.
Press the backspace button if necessary
to delete and reenter a number.
When the Pro−Panel is in the Supervisor Mode, a
gear symbol will appear in the lower right part of
the screen. When it is in the Operator Mode, a
video symbol will appear.
MACHINE STATUS BUTTON
The machine status button allows access to four
different machine status indicators. The default
display shows the battery status when the
machine is turned on. Any of the four indicators
can be set as the default display until the machine
is turned off.
Press the machine status button to access all four
machine status buttons. All four machine status
buttons appear in the display for several seconds
until the default buttons reappear in the display.
The battery discharge indicator displays
the charge level of the batteries while the
machine is operating.
When the batteries are fully charged, all five bars
are illuminated. Recharge the batteries when
there is only one bar shown in the display. Do not
allow the batteries to discharge below 20% (last
bar).
NOTE: The reading on the battery discharge
indicator is not accurate when the machine is first
powered on. Operate the machine a few minutes
before reading the charge level of the batteries.
NOTE: Machines equipped with the fuel cell
option will have the display on the fuel cell
pendant.