Operator Manual

OPERATION
28
T17 9020160 (3−2019)
The hour meter records the hours the
machine was operated. Use this
information to determine machine service
intervals.
The solution tank indicator displays the
amount of liquid in the solution tank. Refill
the solution tank when there are no longer
any bars shown in the display. The
machine will stop scrubbing when the
solution tank is empty.
The recovery tank full indicator displays
FULL when the recovery tank is full. All
scrubbing functions will stop when the
recovery tank is full. Empty the recovery
tank when the indicator displays FULL.
CHANGING THE DEFAULT BUTTON
Press the desired machine status button while all
four machine status buttons appear in the display
to change it to the new default button. The other
three machine status buttons will disappear from
the display and the newly selected machine status
button will become the default until the machine is
turned off. The battery status button will once
again be the default when the machine is turned
on.
1−STEP BUTTON
Press the 1−STEP button to activate all selected
sweeping and scrubbing functions. Press the
1−STEP button again when finished cleaning to
stop all scrubbing and sweeping functions.
NOTE: The squeegee will remain down and the
vacuum fan will remain on for a few seconds to
pick up remaining water after the 1−STEP button
is deactivated.
The 1−STEP button and all selected scrubbing
and sweeping function button will illuminate when
the 1−STEP button is pressed.
The edges of all selected sweeping and scrubbing
buttons will be illuminated to show that they are in
the standby mode prior to the 1−STEP button
being pressed. The selected buttons will become
fully illuminated when the 1−Step button is
pressed.