Operator Manual

OPERATION
32
T17 9020160 (NIL)
ZONE CONTROL BUTTONS
Machines equipped with the Pro−Panel can be
pre− programmed for up to four preset scrubbing /
sweeping settings for different floor cleaning
applications. These must be set up ahead of time
using the supervisor mode. See PROGRAMMING
THE ZONE CONTROL BUTTONS section.
Press the required zone control button. The
selected preset button will illuminate and the
name of the zone appears above the button. The
solution fl ow indicator bar / adjustment buttons
and brush pressure indicator bar / adjustment
buttons briefly appear in the display to show the
settings for the selected zone.