Operator Manual

OPERATION
43
T17 9020160 (3−2019)
PRE−OPERATION CHECKLIST
Perform the following steps before operating the
machine:
 Check the machine for fluid leaks.
 Check left side squeegee for wear and
damage.
 Check main brushes for wear and damage.
Remove wire, string, or twine wrapped around
the main scrub brushes.
 Machines equipped with cylindrical brushes:
Confirm the debris tray is empty and clean.
 Machines equipped with side brush option:
Check for wire, string, or twine wrapped
around the scrub brush.
 Machines equipped with side brush option:
Check squeegee for wear and damage.
 Machines equipped with Pre−Sweep option:
Check for wire, string, or twine wrapped
around the scrub brush.
 Machines equipped with Pre−Sweep option:
Check dust control filter bag.
 Machines equipped with Pre−Sweep option:
Confirm debris trough is empty.
 Machines equipped with live wand option:
Confirm debris tray is empty.
 Check the rear squeegees for wear and
damage.
 Check the recovery tank cover seal for wear
or damage.
 Confirm the vacuum fan inlet filter is clean.
 Machines equipped with ES option: Ensure
ES filter at bottom of recovery tank is clean.
 Check the right side squeegee for wear and
damage.
 Check the solution tank cover seal for wear or
damage.
 ec−H2O Scrubbing: Confirm all conventional
cleaning agents/restorers are drained and
rinsed from the solution tank.
 ec−H2O Scrubbing: Confirm the solution tank
is filled with clear cool water only.
 Check the horn, headlights, taillights, safety
lights, and backup alarm (if equipped).
 Check the brakes and steering for proper
operation.
 Check parking brake pedal for proper
operation.
 Check the tires for damage.
 Check maintenance records to determine
maintenance requirements.