Operator Manual

OPERATION
47
T17 9020160 (9−2016)
ec−H2O BUTTON (OPTION)
The ec−H2O button enables the ec−H2O system
to come on when the 1−STEP button is activated.
Press the ec−H2O button to turn on the ec−H2O
system.
ec−H2O machines equipped with severe
environment switch only: Machines equipped with
the severe environment switch default to the
ec−H2O setting upon start up.
Machines equipped with standard control
panel: The ec−H2O button enables the ec−H2O
system to come on when the 1−STEP button is
activated. The light above the button will come on.
Standard Panel
A flashing red light located on the bottom portion
of the LED (light−emitting diode) light directly
above the ec−H20 button indicates when the
ec−H2O system needs to be flushed. See
ec−H2O MODULE FLUSH PROCEDURE in the
MAINTENANCE section.
Standard Panel
Machines equipped with Pro−Panel controls:
The background will change from black to the
multicolored background, the slash disappears
from the ec−H2O button, and the button is
illuminated when the ec−H2O button is pushed to
indicate it is active.
Pro−Panel
The ec−H2O button will turn red, the fault / alert
indicator button will flash, and an ec−H2O error
message will appear in the display when there is
an ec−H2O error.
Pro−Panel