Operator Manual

OPERATION
53
T17 9020160 (3−2019)
DOUBLE SCRUBBING
Double scrubbing is the process of making two or
more passes over a heavily soiled area. The first
pass is made with the rear and side squeegees
raised to allow the solution to soak into the floor.
Use the double scrubbing method to clean heavily
soiled areas.
Double scrubbing can be performed using the
ec−H2O SCRUBBING SYSTEM (option), ES
SCRUBBING SYSTEM (option), or
CONVENTIONAL SCRUBBING methods.
Manually lift both side squeegee assemblies and
position the double scrub latch to hold the
squeegees in the raised position.
Press the 1−STEP button and then the Vacuum
fan/squeegee button. The light above the Vacuum
fan/squeegee button will turn off, the squeegee
will rise, and the vacuum fan will stop operating.
Scrub the heavily soiled area. Let the cleaning
solution soak on the floor for 5−15 minutes.
Machines equipped with standard panel:
Press the 1−STEP button and then the vacuum
fan / squeegee button. The light above the
vacuum fan / squeegee button will turn off, the
squeegee will rise, and the vacuum fan will stop
operating.
Machines equipped with Pro−Panel panel:
Press the 1−STEP button and then the vacuum
fan / squeegee button. The vacuum fan /
squeegee button will no longer be illuminated, the
squeegee will rise, and the vacuum fan will stop
operating.
Scrub the heavily soiled area. Let the cleaning
solution soak on the floor for 5−15 minutes.
FOR SAFETY: When using machine, go slowly
on inclines and slippery surfaces.