Operator Manual

OPERATION
56
T17 9020160 (5−2014)
DRAINING AND CLEANING THE RECOVERY
TANK
Drain and clean the recovery tank daily or when
the recovery tank full fault code appears on the
LCD display.
Clean the outside of the tank with vinyl cleaner.
1. Drive the machine near a floor drain.
2. Lower the rear bumper door / step.
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, set parking brake, and remove key.
3. Unhook the recovery tank drain hose from the
recovery tank.
4. Hold the drain hose near a floor drain, twist
the drain nozzle open, and place the hose
near the floor drain.
NOTE: Be sure the drain hose nozzle is pointed in
a safe direction before opening the nozzle.
5. If necessary, twist the drain nozzle to another
position to adjust the flow rate.
6. Lift the recovery tank cover and flush out the
recovery tank with clean water. Rinse the
sensor near the top of the tank.
ES machines only: Clean the second lower
sensor (not shown).